Just a couple of pictures that got left off Post no 38 on the A6
April 3, 2010
March 6, 2010
A13 Boxwood pictures
Just a few quick pictures of this Boxwood A13 I have just finished
February 7, 2010
Window to my workshop – 38
A6 Smoothing Plane
At last I have managed to find a little bit more time for another entry in my blog. For this entry I have decided use some old pictures of an A6 in the making as I have come across some pictures which could be useful. As usual there are a lot of gaps in the picture diary and so I will start with the project already under way. I feel sure that it will still provide some interest.
This A6 is one of the least copied planes around but is one of my personal favourites. This is the real smoother as this plane is never much more than 7-7 .5 inches in length as its only job was for surface finishing. This pattern is one of the most traditional, a fully handled infill plane.
I have been congratulated by many for introducing this informative blog as it shows how different my work is from other plane makers either historic or contemporary. There are good plane makers but I feel that my methods set me apart.
“The nicest things about standards is that there are so many of them to choose from “ Andres S Tannenbaum.
After all the profiling and dovetailing has been completed (this is the same process as with my other infill planes and has been documented elsewhere in these blogs), I can concentrate on the mouth and the frog. As you will see from the picture the mouth is slotted and the holes drilled in preparation for the frog riveting.
January 3, 2010
Window to my workshop – 37
I thought I would put this picture up for the benefit of the customer who is buying it. I plane all round for truing up. As you will notice I have chosen to do all my planing on the milling machine as it will plane true without any tearing when it comes to the more difficult grains. I achieve more accuracy this way than I would do on an ordinary planer/thicknesser.
January 1, 2010
Window to my workshop – 36
T21 Transitional Dovetailed Jointer Plane
Boring and counter boring the hole in the bun blank for the fixing stud.
December 26, 2009
Window to my workshop – 33
T21 adjuster
The adjuster for this plane is of the well known Norris type. As with all my Norris style adjusters they have some revisions.
In these pictures you can see two small holes which are used to secure the adjuster body. One of the larger holes is for the rotating nut and the other is an extra hole to assist in work holding when machining (as in the second picture).